
Page: 11 / 15
Wired alarm zones
The alarm system have DC12V output, it can be used to supply the voltage for the wired sensors.
The alarm system support two wired zones L1/L2 are the 2 wire alarm inputs.
Note: The wired zone support NO/NC wired sensor.
6. Operation Instructions: the factory password is: 0000
- A long beep sound for all the proper operations
- Two short sounds for wrong settings.
6.1 Password: Open/Close password protection function, Change user’s password
Command: *11* Password protection enable
Command: *10* Password protection disable
Command: *7xxxx* Password modification;
Ex: new password 8888 enter command *78888*
6.2 Siren alarm sound enable/disable:
Command: #00# disable siren alarm sound
Command: #01# enable siren alarm sound A
6.3 Set up alarm calling telephone numbers:
Command: #NTTTTT#
Description:
A maximum of 6 numbers can be entered to the system:
- N: value 1 to 6 (1 is the first input number and when there is an alarm condition the number is called
first)
- TTTTT: is the phone number to be dialed (maximum 13), please enter it as you would make the
phone call dialing.
- Ex: #18005558888# system will call this number 800555888 when there is an alarming condition.
6.4 Delete alarm calling telephone numbers:
Command: #N#:
Description:
N (1-6): delete the entering telephone number.
6.5 Siren alarm sound time out:
Command #9xx#
Description: xx= 00-30 (minutes) ex: #95#, When alarming: the siren will sound 5 minutes.
6.6 Alarming delay:
Command: #7xx#
Description: xx= 00-99 (seconds) ex: #730#, the system will alarm after sensor is triggered 30 seconds.
6.7 Arming delay:
Command: *4xx*
Description: xx= 00-99 (seconds) ex: *430*, the system will auto ARMING after press ARM key 30 seconds.
6.8 Remote telephone ringing times:
Command: *6x*
Description: x= 0-9 (seconds) ex: *63*, if will automatically get through after ringing 3 times,
*60*, means no ringing times.
6.9 Siren sound feedback when using the remote control:
Command: *21*
Description: The siren will have a short feedback sound when you press remote control
Comentarios a estos manuales