Page: 15 / 17
Command: #08HHMMA# Alarm disarming timer
Description HH = hour (0-23) , MM= minute (0-59); Ex: *071830*, means set up 18:30
A = 0-9: 9 group of alarm timing can be programmed: 0 = disable arming timer; group 1 to group 5 timer can
be used repeatedly, group 6 to group 9 timer can be used only one time; Ex: #0800000# all timer off.
Command: #09HHMMA#
Description: “HH” means hour(2-degits), “MM” means Minute(2-degites), the hour is 24 clock.
“A” 0-9 : Can set 9 groups timing time strike: 0 = disable timing time strike; group 1 to group 5 timing strike
can be used repeatedly, group 6 to group 9 timing strike can be used only one time;
Ex: #0900000# close all timing arm
6.2 GSM messaging prompting:
6.2.1 Editing SMS prompting messages; ( 9 groups)
SMS: 0000AB
Description: Editing sms, 0000 is password, “A” (1-9), means 1-9 group numbers; “B” means SMS
content(e.g. this is a door sensor alarm)
e.g. send sms:” 00001 this is a door sensor alarm” this is the first group self editing sms.
SMS: 0000A*
Description: Query the editing sms contents, 0000 is password, “A” (1-9), means 1-9 group numbers; e.g.
send sms: 00001*, the system will reply the first group sms contents.
Command: #03AAB#
Description: sms direction after alarming, “AA” zone number (00-99), “B” is 9 group editing sms contents(0-9).
EX #03011#, the system will send the first group SMS contents to user after zone 1 be triggered.
6.2.2 Set the types of 6 groups alarming telephone number and power failure
Command: #AB#
Description: Set the types of 6 groups alarming telephone number, A=1-6 means 1-6 groups alarming
telephone number; B=2-4 , 2 means only give a call to user when the system alarming, 3 means only give a
SMS to user when the system alarming, 4 means give call and SMS to user when the system alarming.
e.g. #14# means the 1
st
group telephone number can send SMS and make a call;
#12# means the 1
st
group telephone number only can make a call, cannot send SMS;
Command: *05A*
Description: Set power failure alert A = 0-7 0 means close power failure alert function 1-6 means send
to which group telephone number when power failure. 7 means send power failure alert SMS to all 6 group
telephone numbers.
6.2.3 Set the brightness adjustment of digital display
Command: *08A*
Description: A(0-7), 8 level brightness adjustment.
6.2.4 SMS commands: where 0000 is the password
SMS: 0000CF Disarm the system
SMS: 0000SF Arm the system
SMS: 0000bF Intelligent arm the system
SMS: 0000STATUS Querying status of the system
SMS: 0000ON Set the OUT line active
SMS: 0000OFF Disable the OUT line
Note: All the above mentioned commands can be operated by editing text message with the format of
“password + the content of command”. For example If setup the first phone number as 87654321 by SMS,
edit “0000#187654321# ”and send it to the alarm panel;
(15 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales